GRID - hacks and hacking, trainers and others

pohead123 · Post by **pohead123** » Fri Nov 14, 2008 1:14 pm

thank you VERY much for your help.

I will try that right now.

for dd it's

stk_v.3.7

although I did find more than one of them..

but I try all of them..

I'll let you know how it goes!

thank you!

edit:

ok...

I can find the offset for gear 2, I search for float 0.133000 , and the 2nd address down in the list, is the correct one. I change that to my hacked ratio, 0.1133000

it works, but it limits the car to 67mph

the reason is because gear 3 has NOT been hacked, so gear 3 has a LOWER ratio than gear 2.. so it limits speed

I search the ratio of gear 3, and it finds 14 values. I tried every one, and none of them seem to change my gear ratio..

edit:

ok, I tried what you said of going up four addresses...

four addresses up from the gear 2 address is blank. no value..

Post by **Sethioz** » Fri Nov 14, 2008 8:28 pm

although I did find more than one of them..

first one found in memory, should be right.

ok, I tried what you said of going up four addresses...

four addresses up from the gear 2 address is blank. no value..

just in case, make sure you added the values right. sometimes even i mess up something and add wrong address.

here's what you can do. you did found one gear right ? well look at the beginning of address. lets say address is "49BBCC00"
now in Tsearch go into "view" - "options"
change "range" from 49BB0000 to 49BBFFFF. this should be all you need, then you only find right addresses. if not, then you can make search wider, like from 49B00000 to 49BFFFFF. guess you got the point ?! and it applys to ALL vehicles. game only uses one specific memory range to map those .csv files. so they always will be in that range.

but once you find all gears, you will see that difference is 4. it means each gear ratio is 4 bytes and then next gear ratio starts.
1st gear - aabbccdd10
2nd gear - aabbccdd14
3rd gear - aabbccdd18

pohead123 · Post by **pohead123** » Mon Nov 17, 2008 10:39 am

thank you!

I found all of them!

now my next problem.. when I edit gear ratios in memory, it does not make the car go as fast as it does if I edit it through csv file.

mind sharing what gear ratios you use when memory editing? what gear ratio did u use for your 705kmh car?

Post by **Sethioz** » Mon Nov 17, 2008 3:41 pm

Code: Select all

0.080000,0.133000,0.187000,0.240000,0.000000,0.000000,0.000000,0.000000

well if that was your original, then i would add lil bit to them:

Code: Select all

0.090000,0.133000,0.197000,0.250000,0.290000,0.340000,0.390000,0.450000

something like this, but it still does not make your car go fast dude.
do you know what is "gear ratio" ?
Gear Ratio has nothing to do with power, so it does not make your car go faster. just like on real car, if you fit a 7 speed low gear ratio transmission on a car with 200hp or less, then it wouldn't be able to even accelerate on 6-7th gears, because engine has no power.

so, think. you need to change torque (power) too. gear ratio will only give you either acceleration or top speed.[/color]

pohead123 · Post by **pohead123** » Tue Nov 18, 2008 1:41 pm

yes I'll try that, thanks.

xcyberspiderx · Post by **xcyberspiderx** » Fri Nov 28, 2008 8:34 am

Ok cool i has spoken about an trainer before in this section and Sethioz said its gona be difficult to get. Well i got a easy one thats better and well it works online 2.
Ok i uploaded the video on you tube how to do it and what you need with everything. Follow the video and pause the screen at the txt file with discription. If you follow it right you wont have a problem. Well like most time i went to far and the fkrs kicked me haha but my score went -2,564,897,878 seems like it cant get higher.

Ok here is the link to that video.
http://www.youtube.com/watch?v=pzhdoyJxr6k

If you play arround you will get much more right out of it all i use was the drift file..i took the codings like 3.50 for drift time and made my first drift offline then pause the game go to cheat engine and enter the value for the drift time 3.50 and changed it. That was the only way i could find that worked for me online nou when ppl see me they say cheater lol but fk them hahaha.

Post by **Sethioz** » Fri Nov 28, 2008 8:53 am

uhm. It's not hard to get crazy scores online. I simply changed the multiplier to like 200 or so, not the drift time.
so every small drift gives you LOT of points.
As about score, yes i know it goes to - (negative value). Im not 100% sure, but i think that limit is 999 mils (999 999 999 9). after that it throws your score to some negative value and you lose

xxme2xx · Post by **xxme2xx** » Tue Dec 09, 2008 11:46 pm

Hi Sethioz, i am tring to do something with my profile on GRID but am not having much luck, i was hoping u may be able to help.

problem is i have 3 online accounts for the game, all of them i have done pretty well on exp points, 2 legend acc and 1 elite.

what i am trying to do is to merge the exp points of all 3 acc together, and then just use the 1 acc,

but i am having troubles

i am noob to using tsearch and such but heres what ive got so far

i find the address for my exp points "xxxxxxx" exact value using 8bytes search,

then i try to change value to the combined value of the 3 acc but it doesnt seem to work and i dont know what else to try

hope you can help thank you in advance

Post by **Sethioz** » Wed Dec 10, 2008 9:26 am

well if you found the exp points, then you should be able to change it easily. you cant really merge anything, you can only change it to whatever you want.
you can only find the exp while in the lobby, where you can see your points. so once you find it, then simply freeze the value on like 30030000exp, or something like it, then go back into lobby and see if it changed (ofcoures close your score board and reopen it). now if it changed, UNfreeze the value and go do a race. now if you gain like 3 exp points, then it should add +3 to your account so it will be 30030003. then you can do more races if you want, but it should save the score now (at least it saved it for me).

-note, it is bugged lil bit and doesn't always save your experience, but its possible.

xxme2xx · Post by **xxme2xx** » Thu Dec 11, 2008 7:55 pm

Thank you for your reply, i gave it a try when i finished work.

i found value again, and then done a few races (about 10 or so) just to see if the value matches with my exp points, and it does so i assume i have the correct address. (i hope)

so then while in lobby where i can see my points i changed the value to what i wanted and then freeze it.
then i exit lobby and rejoin, view points and nothing has changed

(i tried this many times)
so then i tried to race with value frozen (that did not have any effect either)
maybe i am not doing somthing right i dont know

one thing that i thought was strange is the address that i found the value in never seems to change (always the same address) even restarting the game

anymore advice you can give would be very helpful (maybe you know what i do wrong)

now for the weird part: i seem to have somehow made my car tottaly indestructable

(but i dont know how) i can crash flat out and i dont get wrecked, but other cars do lol. woohoo

i am now a indestructable kamakazi. but no luck with my exp points which was the main thing i wanted to do

Post by **Sethioz** » Thu Dec 11, 2008 8:38 pm

Well Thuuning found out that its possible at first place. think he used 4bytes search ?! or was it 2bytes search.
anyways, here's what i did:
1. found the value
2. changed it (did not freezed)
3. exited the score board (not lobby)
4. reopened the score board (in lobby)
-now my points already changed !!!
5. i did few races.
-for example i had 303000 experience and i did 1 race and optained 3 points (total of 303003)
-now when players got back into lobby, i still had 303003 points. now i did more races and it still stayed same.
6. now i exited game.
7. i rebooted game and logged in, went into lobby and i still had the points.

NOTE - i never froze the experience. and you also CANT leave lobby while doing it. only close scoreboard, but do not leave lobby. this is why you need a friend who can wait and not start the race.

Post by **Sethioz** » Tue Dec 30, 2008 7:08 pm

*IMPORTANT UPDATE*
I have no idea how I missed this one, but even i miss things sometimes

Tsearch 1.6b (not 1.6) has an "replace" option. I have not tested it, because i don't have game anymore, but im quite sure it can do exactly what i want. it can replace the car data with other data. So all you have to do before race is:
1. you put both datas into a file (original and modified - your super car!)
2. now you simply click on "replace" in Tsearch and paste original value into find box and modified into replace box and hit replace.
NOTE - you have to make sure that your data only occurs once in memory ! OR it has to be FIRST in memory.

only problem with this, is that it can't replace very long values, so doh, but hey ! its worth trying !

xxme2xx · Post by **xxme2xx** » Sun Jan 04, 2009 3:21 pm

hi sethioz, been a while, oh btw happy new year and all the best for 2009
ive been enjoying the festive period and getting really drunk and eating lots of food

ive had a good few attempts at the exp points hack and have got it semi working,

what i did:

1. found the value
2. changed it (did not freezed)
3. exited the score board (not lobby)
4. reopened the score board (in lobby)

tried this many times but no change

the only way it would work was if i leave and then rejoin lobby, then it works but problem is it doesnt save the points on the server

(still fun tho to have massive score during time online) but i want it to save

also i have been playing around with the ebay.xml file in gameconfig <----much fun to be had here (i got a laccetti to do 0-274kmph in around 4 secs

)
i will post more about this one soon and maybe a tutorial if anybody is interested on how to do it

PS almost forgot to mention this also works online on all versions of the game v1.0 v1.1 and v1.2

Post by **Sethioz** » Sun Jan 04, 2009 6:20 pm

Well experience did save for me. I changed it and then went online and raced, so i gained some exp points. the reason why it saved, was because i already had like 303000 exp and then game added +3 to that value and saved it.

about ebay.xml, i assume it contains the used cars data or something like that ? so it means you can change data of used cars and when you buy them, it will be saved into your savegame with the modified data ?! i never took a look in it myself, i dont like GRID much, its too stupid game lol. what i mean is...theres no setup, no tuning, even no car specs...etc. i like only games where you can customize your car (not tune, but setup). basically i can do that by hacking it, but its not same. no pitstops either and you cant even choose your tyre compound...so in other words this game is made for lil children who only wanna RAAACE like donkeys (or retards, like you see online lmao). only good things in GRID are car handling and damage.

anyways post the tutorial about ebay.xml hacking. or maybe its better if you post the ebay.xml file (if its not long) and comment the lines (like i did with car files), but use CODE block if you post the file content.

Camster3 · Post by **Camster3** » Mon Jan 12, 2009 8:02 am

hi
i have worked out most of the speed, weight, and gears but i just work out how to get the turboboost hack and hydros hack working so would you be able to give a car file with it already put on it
Thx

Post by **Sethioz** » Mon Jan 12, 2009 9:53 am

you can't make turboboost with a file. you need to change values in real time with a memory editor.
haven't you checked the turboboost tutorial ?

what were you thinking ? you can't just add some hotkeys into the file lol.

Camster3 · Post by **Camster3** » Mon Jan 12, 2009 10:11 am

i have but i just can;t figure it out because i can see the numbers on the turorial because its so blury but. but im gonna try agin

Post by **Sethioz** » Mon Jan 12, 2009 4:32 pm

then get the high quality video, thats why its there. and numbers you can get from the files duh..

Camster3 · Post by **Camster3** » Wed Jan 14, 2009 12:29 am

i tried opening the hq video but it just doesn't load and i have a hugely fast internet connection so would you be able to upload it to youtube or soemthing like that because i left it for 3 hours ans it didn't load but it only takes 1 hour to download 1gb but i am getting further into hacking GRID

Post by **Sethioz** » Wed Jan 14, 2009 10:26 am

It starts to go out of topic here
anyways thats probably because you use avant or IE or some other crappy browser. works fine in FireFox with plugins. Anyways just right click the download (blue arrow) and click "save target as.." or "save link.." ..or what option you have in your browser. download speed has nothing to do with it, you just have to know how to download a video doh. its only 34mb.

Camster3 · Post by **Camster3** » Wed Jan 14, 2009 10:37 am

i ues fire fox
soz about going out of topic but yes i use firefox and it doesn't load

Camster3 · Post by **Camster3** » Fri Jan 16, 2009 12:35 am

yep got the video thx

markth · Post by **markth** » Sat Mar 28, 2009 2:02 pm

hi all...in first sorry for my english...

so, i want put more grip in cars...i change directly files tyreGrip.cvs, but i cant play online whit file modified.
i want put 140 in all values for tarmac... it is possible to do this to play online? how?

i want change only file tyreGrip.cvs

I know nothing about hack..but i have programes like CE tsearch etc...

help me

thx

Post by **Sethioz** » Sat Mar 28, 2009 2:47 pm

Actually i have already explained all that in earlier posts.
in short, game checks your files for modifications (thats normal). so if you simply change tyre grip in file, then its called modding, not hacking. Hacking is when you hack into game's memory and change it there.
huh ? - game loads tyregrip.cvs file into memory, which you can edit with Tsearch (or other named memory tools. CE, artmoney..etc).

i do not have game so i can't help you there, but here's what i would do:
change tyregrip to some UNIQUE value.
lets say that default grip is 100
change it to like 303555303
save the file
enter offline race
search for "303555303". (< this value fits into 4 bytes, so use 4 bytes search)
hopefully you end up with no more than 40 addresses (if not, you can always test with other unique values)
now add all of them into cheat list (in Tsearch its cheatlist)
try them one by one and see which one has effect. change 1st address to 100 and see if grip changed back, if it did, then you have found right address.
now in Tsearch. open HEX view. there click on the 2nd button (GoTo)
type in the address and go there.
look at the memory in that position
hopefully it has some pattern you can use to search. for example:
64 00 00 00 23 00 00 00 54 57 00 00 43 45 67 00 ..etc (its just example !)
so next time you boot up game with original file, you can insert that HEX string into HEX search and find it easily.

NOTE that Tsearch does not support long HEX string searches, however ArtMoney can search for pretty long HEX strings. Read my earlier posts on how to replace parts of car data. it should give you pretty good idea how its done.

Here's an example screenshot of a HEX view too.

markth · Post by **markth** » Thu Apr 02, 2009 11:43 am

thx

but, I tried to do this, but I cant do notting

the TyreGrip not have a single unique value, has many values..i post rhis values here...

---------------------------
,,DEFA,LGRA,MGRA,HGRA,PEAG,LPEA,WGRA,MUDD,TARM,RTAR,WTAR,CONC,DIRT,GRAS,LEAF
,,Default,Light Gravel,Medium Gravel,Heavy Gravel,Pea Gravel,Light Pea Gravel,Wet Gravel,Mud,Tarmac,Rough Tarmac,Wet Tarmac,Concrete,Dirt,Grass,Leaves
LIGR,Light Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
MDGR,Medium Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
HEGR,Heavy Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
DUGR,Dusty Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
LPGR,Light Pea Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
PEGR,Pea Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
WTGR,Wet Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
INGR,Intermediate Gravel,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
MUDD,Mud,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
SMTM,Smooth Tarmac,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
ROTM,Rough Tarmac,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
WTTM,Wet Tarmac,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
INTM,Intermediate Tarmac,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100
-----------------------------------

I wanted to change all 100 to 140 ... but that is probably impossible..i dont know

Post by **Sethioz** » Thu Apr 02, 2009 1:54 pm

i said CHANGE them to unique value. ofcourse they don't have unique values there. use "replace" command in whatever text editor you are using and change them all to some UNIQUE value as i said and then search for it in the memory scanner. then make a note in what memory range those addresses will be. later you can use the "address range" search to find them all in just one search.
Ofcourse you can always search for strings like "Rough Tarmac" in memory (use HEX view) and find them manually, but best way is what i said.
If you don't know how memory editor works, then read the Basic game hacking tutorial or use the Tsearch's tutorial. it is included under Tsearch's help.

Drekzao · Post by **Drekzao** » Fri May 22, 2009 4:48 pm

so here's the deal.
m8. i'v downloaded ur
DRIFT FILE ,
that puts the timer to 9sec.
and it worked.
but what i really wanned was the x85combo multiplier explanation
:S

what do i need to change exactly ?

(btw, if isnt here that i need to post, tellme again xD)

Drekzao · Post by **Drekzao** » Fri May 22, 2009 5:14 pm

or explain me how did u puted the x1000 combo multiplier :S

Post by **Sethioz** » Fri May 22, 2009 6:30 pm

get a memory editor and search for the value you have to use debugger anyways, because address changes every time you change race mode or exit game ..etc.

this is from my first post..try reading. if you don't know how to use memory toools, then read Basic game hacking & Toolz for it ! tutorial. < this will teach you how to find values and how to use debugger.

Drekzao · Post by **Drekzao** » Fri May 22, 2009 9:49 pm

i just cant find values,
cuz its only the same numbers etc.

cant u just tellme the combo values ?
(the numbers)
or
i need to go to go again to the other forum
and read the same thing ? =\

Post by **Sethioz** » Fri May 22, 2009 10:26 pm

obviously you have no idea how to use memory tools..
you make no sense at all, how can i tell you the values in your game ? i do not see to your screen, why can't you just look at it yourself ?

1. you find the multiplier in single player (10 min race recommended)
2. you use debugger to find the breakpoint
3. you add the breakpoint/s into 'cheat list' and set values
all that is explained in the basic game hacking tutorial.
you can also watch the video tutorials where i use debugger (it does not matter what game it is, process is still all the same).

Drekzao · Post by **Drekzao** » Fri May 22, 2009 10:43 pm

ur right i dont have any idea how 2 use this stuff :S

so.
i run the Tsearch,
then
GRID
then
i do some combos in single play.
then.
i go to Tsearch,
and go to
AutoHack
then
enable debug,

(or i need to have it enable first ? )

then (how do i make breakpoint)

what tipe of (values do i need to input ?)

:S

this is really a mess 2 me

Post by **Sethioz** » Sat May 23, 2009 12:45 am

read the basic game hacking tutorial, this is not a GRID hack discussion anymore.

Drekzao · Post by **Drekzao** » Sat May 23, 2009 11:29 am

"this is not a GRID hack discussion anymore."

so, where can we talk ONLY about Grid hack . . .

?

Post by **Sethioz** » Sat May 23, 2009 3:01 pm

the stuff you talk about is not grid hacking, it is the BASICS of computer memory. you need to read the basic tutorials and learn how memory works and what is debugger (autohack in tsearch).
its just like you cant use computer without knowing how keyboard and mouse works.
i already linked you to tutorial, so read it

Drekzao · Post by **Drekzao** » Sat May 23, 2009 3:27 pm

oh man , just nevamind.....

cant u just post a downloadable file.
of what i was asking for ..

i dont really understand how to do it.

or just a video doin it...

sorry ...

Post by **Sethioz** » Sat May 23, 2009 4:07 pm

no, you do not understand, there is no file.
it is a hack, not a mod. hacks does not have files, you have to make them.
i already have made few video tutorials that will show you how to make such things.
it seems like you never even read the basic game hacking tutorial.

Drekzao · Post by **Drekzao** » Sat May 23, 2009 6:08 pm

i did,
but. the Turbo hack .
isnt the same stuff. cuz u open the GTR file :S

i dunno m8 :S

Drekzao · Post by **Drekzao** » Sat May 23, 2009 6:11 pm

cant u do a video about the DRFIT HACK ?
it wold help ppl that dont understand like me :S
i dunno.

thank's

Post by **Sethioz** » Sat May 23, 2009 11:51 pm

*plz use "edit" button instead of replying to your own post*

I only open the file to get the long values, on combo you search the combo. so you already know the value.
however i mean't look at my other video tutorials about game hacking.
for example watch this one:
Tomb Raider Underworld - Infinite ammo hack
process is exactly same in grid, only instead of ammo you are searching the combo multiplier.
and no im not going to make another video, i dont have game and also process is exactly as its described in the Basic game hacking tutorial.

Drekzao · Post by **Drekzao** » Sun May 24, 2009 11:31 am

i did it m8

the video helped alot

: D thank's

Post by **Sethioz** » Sun May 24, 2009 5:37 pm

actually theres small difference, in grid you have to click on the right breakpoint (in autohack window) and then click on "disassembler" tab at bottom, then on first line right click and choose 'register', then choose "register" tab on bottom.
there is the necessary multiplier. it is the function, so it wont change in your game. then you 'freeze' it and in the "replace by" box you type your value.

NOTE that those values are in HEX, not dec. to convert them, use a simple calculator (either real one or software, as long as it has hex, dec..etc buttons on it).

Drekzao · Post by **Drekzao** » Sun May 24, 2009 6:17 pm

hum thank's m8,
i tried like 3times,
and the got some results..
my hard challenge was how to find the values.
in Tomb.Rider u have to shoot.
and in grid , i was like HUMM?
and NOW ? WTHELL ?
and then i made some scores and then
Bammm ^^ Thanks a lot 4 the help u provided

Drekzao · Post by **Drekzao** » Sun May 24, 2009 7:05 pm

can u tellme how u changed the visual from ur car ? :S

Post by **Sethioz** » Mon May 25, 2009 3:50 am

for bunnyz sakes use the damn edit button if you wanna add something to your own post that is unreplyd !

I can't remember but it is not hacking anymore, it's modding. there's some files that hold the car's config and stuff. including the positioning of the number and such. go thru the game files, its easy to find. also can't remember what format they were (xml, cfg ..or something like that), but it doesnt matter, you can still read them with any text editor.

Drekzao · Post by **Drekzao** » Mon May 25, 2009 4:13 pm

The File
in
C:\Programs\Codemasters\Grid\cars\gtr ~ " DECALS.XML"

is this

__________________________________________________________________________________

<?xml version="1.0" encoding="UTF-8" ?>
<CarDecalSet>
<Decal type="slot0">
<Instance posU="0.653000" posV="0.097000" width="0.077000" height="0.026770" rotation="0.000000" flip="false" />
<Instance posU="0.875400" posV="0.363200" width="0.190000" height="0.066054" rotation="0.000000" flip="false" />
<Instance posU="0.266600" posV="0.364000" width="0.220000" height="0.076484" rotation="-13.400000" flip="false" />
<Instance posU="0.484800" posV="0.599600" width="0.220000" height="0.076484" rotation="13.400000" flip="false" />
<Instance posU="0.124800" posV="0.857600" width="0.140000" height="0.048672" rotation="90.000000" flip="false" />
</Decal>
<Decal type="slot1">
<Instance posU="0.205000" posV="0.630000" width="0.079000" height="0.027465" rotation="2.000000" flip="false" />
<Instance posU="0.547000" posV="0.393000" width="0.080000" height="0.027813" rotation="-2.000000" flip="false" />
<Instance posU="0.164000" posV="0.084600" width="0.140000" height="0.048672" rotation="0.000000" flip="false" />
<Instance posU="0.791000" posV="0.100000" width="0.160000" height="0.055625" rotation="0.000000" flip="false" />
<Instance posU="0.789000" posV="0.733000" width="0.070000" height="0.024336" rotation="0.000000" flip="false" />
<Instance posU="0.916000" posV="0.733000" width="0.070000" height="0.024336" rotation="0.000000" flip="false" />
<Instance posU="0.127000" posV="0.965000" width="0.100000" height="0.034766" rotation="0.000000" flip="false" />
<Instance posU="0.517000" posV="0.100000" width="0.160000" height="0.055625" rotation="0.000000" flip="false" />
</Decal>
<Decal type="slot2">
<Instance posU="0.690800" posV="0.651400" width="0.080000" height="0.027813" rotation="0.000000" flip="false" />
<Instance posU="0.057800" posV="0.413500" width="0.080000" height="0.027813" rotation="0.000000" flip="false" />
<Instance posU="0.652000" posV="0.230000" width="0.070000" height="0.024336" rotation="0.000000" flip="false" />
<Instance posU="0.126000" posV="0.768800" width="0.070000" height="0.024336" rotation="0.000000" flip="false" />
</Decal>
<Decal type="slot3">
<Instance posU="0.149000" posV="0.565000" width="0.040000" height="0.013906" rotation="2.000000" flip="false" />
<Instance posU="0.050000" posV="0.387500" width="0.060000" height="0.020859" rotation="0.000000" flip="false" />
<Instance posU="0.140000" posV="0.509000" width="0.040000" height="0.013906" rotation="1.000000" flip="false" />
<Instance posU="0.232000" posV="0.810000" width="0.035000" height="0.012168" rotation="86.000000" flip="false" />
<Instance posU="0.019000" posV="0.810000" width="0.035000" height="0.012168" rotation="-86.000000" flip="false" />
<Instance posU="0.701000" posV="0.625000" width="0.060000" height="0.020860" rotation="0.000000" flip="false" />
</Decal>
<Decal type="slot4">
<Instance posU="0.151000" posV="0.543500" width="0.040000" height="0.013906" rotation="2.000000" flip="false" />
<Instance posU="0.138000" posV="0.488000" width="0.040000" height="0.013906" rotation="2.000000" flip="false" />
<Instance posU="0.044000" posV="0.368000" width="0.040000" height="0.013907" rotation="0.000000" flip="false" />
<Instance posU="0.708000" posV="0.606000" width="0.040000" height="0.013906" rotation="0.000000" flip="false" />
<Instance posU="0.018000" posV="0.849000" width="0.035000" height="0.012168" rotation="-88.000000" flip="false" />
<Instance posU="0.233000" posV="0.849000" width="0.035000" height="0.012168" rotation="88.000000" flip="false" />
</Decal>
<Decal type="slot5">
<Instance posU="0.224400" posV="0.536000" width="0.045000" height="0.015645" rotation="1.000000" flip="false" />
<Instance posU="0.527600" posV="0.299200" width="0.045000" height="0.015645" rotation="0.000000" flip="false" />
<Instance posU="0.016000" posV="0.889800" width="0.035000" height="0.012168" rotation="-88.000000" flip="false" />
<Instance posU="0.235000" posV="0.889800" width="0.035000" height="0.012168" rotation="88.000000" flip="false" />
<Instance posU="0.582800" posV="0.230000" width="0.045000" height="0.015645" rotation="2.000000" flip="false" />
<Instance posU="0.723800" posV="0.230000" width="0.045000" height="0.015645" rotation="-2.000000" flip="false" />
</Decal>
<Decal type="slot6">
<Instance posU="0.289800" posV="0.536000" width="0.045000" height="0.015645" rotation="0.000000" flip="false" />
<Instance posU="0.459600" posV="0.298200" width="0.045000" height="0.015645" rotation="0.000000" flip="false" />
<Instance posU="0.540800" posV="0.159500" width="0.045000" height="0.015645" rotation="0.000000" flip="false" />
<Instance posU="0.764800" posV="0.159500" width="0.045000" height="0.015645" rotation="0.000000" flip="false" />
<Instance posU="0.014000" posV="0.929800" width="0.035000" height="0.012168" rotation="-88.000000" flip="false" />
<Instance posU="0.236000" posV="0.929800" width="0.035000" height="0.012168" rotation="88.000000" flip="false" />
</Decal>
<Decal type="slot7">
<Instance posU="0.350600" posV="0.536000" width="0.045000" height="0.015645" rotation="1.000000" flip="false" />
<Instance posU="0.400800" posV="0.298200" width="0.045000" height="0.015645" rotation="1.000000" flip="false" />
<Instance posU="0.527800" posV="0.227500" width="0.045000" height="0.015645" rotation="2.500000" flip="false" />
<Instance posU="0.778800" posV="0.227500" width="0.045000" height="0.015645" rotation="-2.500000" flip="false" />
<Instance posU="0.013000" posV="0.969800" width="0.035000" height="0.012168" rotation="-88.000000" flip="false" />
<Instance posU="0.238000" posV="0.969800" width="0.035000" height="0.012168" rotation="88.000000" flip="false" />
</Decal>
<Decal type="number">
<Instance posU="0.311600" posV="0.590500" width="0.055000" height="0.055000" rotation="0.000000" flip="false" />
<Instance posU="0.442200" posV="0.352200" width="0.055000" height="0.055000" rotation="0.000000" flip="false" />
</Decal>
</CarDecalSet>

__________________________________________________________________________________

What do i need to change btw :p

if u help,me . edit the text and post it 2

thank's

and sorry, ill use the EDIT button :0

Post by **Sethioz** » Mon May 25, 2009 5:42 pm

don't really know, you have to test and see, but this is the right file indeed. change some positioning or something and see what happens.
or better yet try to remove the decal postion and such by doing this:

this is original, remove the positioning

Code: Select all

<Decal type="slot0">
<Instance posU="0.653000" posV="0.097000" width="0.077000" height="0.026770" rotation="0.000000" flip="false" />
<Instance posU="0.875400" posV="0.363200" width="0.190000" height="0.066054" rotation="0.000000" flip="false" />
<Instance posU="0.266600" posV="0.364000" width="0.220000" height="0.076484" rotation="-13.400000" flip="false" />
<Instance posU="0.484800" posV="0.599600" width="0.220000" height="0.076484" rotation="13.400000" flip="false" />
<Instance posU="0.124800" posV="0.857600" width="0.140000" height="0.048672" rotation="90.000000" flip="false" />
</Decal>

so it would look like this

Code: Select all

<Decal type="slot0">
</Decal>

try and tell me what happens if you remove it, does it work or crash.

Drekzao · Post by **Drekzao** » Mon May 25, 2009 7:05 pm

btw, r u going to post some info/tutorial about ur Grid Speed Hack ?

(\___/)
(='.'= )
(")_(") Thank's : )

54321 · Post by **54321** » Wed Jun 03, 2009 12:41 pm

can i sugest there are a lot of people who can not really use Tsearch not me but other people who cant so what i do is just save my Tsearch hotkey file and send it to who ever wants it. the save file is .CHA i think ill confirm later

and also the sethioz youtube clip was a great help but you skipped to much lots of people are asking me what is the (003450Fa8 E.G) for and how to find the closest value to it. im making my own clip ill put on by the end of the week just to do the process a bit better

54321 also i would like 2 know how to get handling like the winged cars (open wheel) ive tried everything and just cant get it right

Post by **Sethioz** » Wed Jun 03, 2009 5:00 pm

Well then these lot of ppl should read the Basic game hacking tutorial < this explains how to use it.

the file you talk about is .cht file and it does not work in other computers dude, even in your own it does not work after you close game.
this is why you have to use debugger to find breakpoints and stop addresses from chaning..ofcoures in GRID you can't really use it, because values never change.

to get handling of another car, simply replace the content of a handling file. that simple. or parts, check my list of values which i specified. i didn't do much research so theres lot of things i haven't tested, but you can test them. which is handling, which is grip..etc.