Call of Duty:Modern Warfare 2 console commands via memory?

get your superiourity here ! be an offline or online GOD of the game. infinite ammo, unlimited nitro, turbo boost, god mode, you name it !
Post Reply
Genocide
Newbie..
Newbie..
Posts: 16
Joined: Wed Jan 06, 2010 12:23 pm

Call of Duty:Modern Warfare 2 console commands via memory?

Post by Genocide »

Hi Sethioz,

I am trying to alter console variables via the memory but the console on mw2 is locked so I am unable to do a scan make changes via console then do another scan etc. There was a mod to unlock the console however the game has since been patched and this no longer works.

What I want to try and achieve is switch on the ping numbers and turn off the ping graphs as per this article http://gamerlimit.com/2009/11/hacking-m ... d-of-bars/, it shows the console commands but as I said I am unable to use them. Is there anyway I could narrow down the memory location for those variables with a specific search? I tried searching 0/1 but the results are massive.

Is it possible or am I reaching a bit here?

thanks
User avatar
Sethioz
Admin
Admin
Posts: 4762
Joined: Fri Jul 27, 2007 5:11 pm
Custom: Gaming YT > https://youtube.com/SethiozEntertainment
Game Hacking YT > https://youtube.com/sethioz
Game Hacks Store > https://sethioz.com/shopz
Location: unknown
Contact:

Re: Call of Duty:Modern Warfare 2 console commands via memory?

Post by Sethioz »

umm why you cant use the console exactly ?
problem with 1 and 0 is that the value never changes, however you could search for the whole string in memory, i highly doubt it would help, because most likely the command itself (value where it gets enabled) is simple 1/0 not the command.
well anyways you can try to search for "/cg_scoreboardpinggraph" and see if there is any 0 or 1 near it (in hex its 01).
that is only thing i can think of atm.
Genocide
Newbie..
Newbie..
Posts: 16
Joined: Wed Jan 06, 2010 12:23 pm

Re: Call of Duty:Modern Warfare 2 console commands via memory?

Post by Genocide »

The console is disabled in the game, currently the only way to enable it was with a dll injection someone made although it doesnt work anymore as the game has been patched.

Thanks for the ideas I will look into that once I get my head round my cod4 fov changer.
User avatar
Sethioz
Admin
Admin
Posts: 4762
Joined: Fri Jul 27, 2007 5:11 pm
Custom: Gaming YT > https://youtube.com/SethiozEntertainment
Game Hacking YT > https://youtube.com/sethioz
Game Hacks Store > https://sethioz.com/shopz
Location: unknown
Contact:

Re: Call of Duty:Modern Warfare 2 console commands via memory?

Post by Sethioz »

ok if thats the case, then its easy :) .. i think.
install older version of MW2 (use virtual pc and cracked version of game if it has auto update), version where you can enabled console.
do the trick. enable it so the value is 1, search for 1, then disable and search for 0.
if you find nothing, try same, only this time do unknown search and then changed, not changed..etc. corresponding to what you do, enable or disable.
once you find it, you know where in memory it is located and what is near it. in new version most likely the memory address is NOT same, but it will be way easier for you to find it. for example maybe there is a unique value near it or even a word.
Genocide
Newbie..
Newbie..
Posts: 16
Joined: Wed Jan 06, 2010 12:23 pm

Re: Call of Duty:Modern Warfare 2 console commands via memory?

Post by Genocide »

ha ha genius idea! thanks ill post back when I get round to having a crack (see what I did there? ok not funny)
Post Reply