WPS - Crack any WPA/WPA2/WEP access point / router

[Sethioz]

I don't have the source, but normal reaver's source is surely free and out there somewhere. Just google for it.
If you know how to program, then it should be piece of cake for you to modify it yourself and make it do what ry-reaver does.

[ale8286]

Hello,
I have some problems using ryreaver-reverse. I run kaly linux from live USB (prepared with unetbootin), since BackTrack5R3 is no longer available. I follow all the step of the guide since I arrive to the final command, but I have the following error message

[email protected]:~/ryreaver-reverse# /root/ryreaver-reverse/ryreaver-reverse -b A4:B1:E9:EF:9A:72 -d 60 -x 3 -S -w -vv -c 8 -i mon0
/root/ryreaver-reverse/ryreaver-reverse: error while loading shared libraries: libpcap.so.0.8: cannot open shared object file: No such file or directory

Could someone help me?
thanks a lot!

[Sethioz]

does normal reaver work?

[ale8286]

does normal reaver work?

I did not try... It's installed in kaly linux or I have to download it?

[ale8286]

does normal reaver work?

I tried to use normal reaver and It seems to work, but it stop here and do not receive any other message (I do not know if it is ok)

[email protected]:~# reaver -b A4:B1:E9:EF:9A:72 -d 60 -x 3 -S -w -vv -c 8 -i mon0

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]>

[+] Switching mon0 to channel 8
[+] Waiting for beacon from A4:B1:E9:EF:9A:72

[Sethioz]

i'm not sure what that -x 3 is there, but this happens when station has really poor signal. I've had this few times and it's always caused by crap signal. Only way to measure the true signal strenght, is using Wifi Hopper on XP, rest of the tools fail badly.

Well you can use airodump, set it onto the channel where your station is (in your case channel 8) and then adjust the antenna based on the beacons you receive, it's not best method, but usually when it does not skip beacons, then it means you have good signal.

if normal reaver works and other one doesn't, i don't know where the issue is, since my friend only modified the order it works in, he didn't change any libraries or files.