this is horrible, none of these programs work. cant see my tv in any of them, they wont detect secondary monitor...
softMCCS just shows 1 monitor (netbook's main, no tv).
wtf
EDIT:
ok seems like it does show up now, but umm.
here's what i see with monitor asset manager:
Code: Select all
Monitor
Model name............... LG TV
Windows description...... Plug and Play Monitor LG TV
Manufacturer............. LGE
Plug and Play ID......... GSM0001
Serial number............ n/a
Manufacture date......... 2011, ISO week 1
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.000 (0.7V p-p)
Sync input support....... Separate
Display type............. RGB color
Screen size.............. 160 x 90 mm (7.2 in)
Power management......... Not supported
Extension blocs.......... None
-------------------------
DDC/CI................... n/a
Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.640 - Ry 0.330
Green chromaticity....... Gx 0.300 - Gy 0.600
Blue chromaticity........ Bx 0.150 - By 0.060
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None
Timing characteristics
Horizontal scan range.... 30-83kHz
Vertical scan range...... 58-62Hz
Video bandwidth.......... 160MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1920x1080p at 60Hz (16:9)
Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Detailed timing #1....... 1360x768p at 60Hz (16:9)
Modeline............... "1360x768" 85.500 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
800 x 600p at 60Hz - VESA
1024 x 768p at 60Hz - VESA
1280 x 1024p at 60Hz - VESA STD
1024 x 768p at 60Hz - VESA STD
800 x 600p at 60Hz - VESA STD
640 x 480p at 60Hz - VESA STD
Report information
Date generated........... 10/31/2012
Software revision........ 2.60.0.972
Data source.............. Registry
Operating system......... 5.1.2600.2.Service Pack 3
Raw data
00,FF,FF,FF,FF,FF,FF,00,1E,6D,01,00,01,01,01,01,01,15,01,03,68,10,09,78,0A,EE,91,A3,54,4C,99,26,
0F,50,54,A1,08,00,81,80,61,40,45,40,31,40,01,01,01,01,01,01,01,01,02,3A,80,18,71,38,2D,40,58,2C,
45,00,A0,5A,00,00,00,1E,66,21,50,B0,51,00,1B,30,40,70,36,00,A0,5A,00,00,00,1E,00,00,00,FD,00,3A,
3E,1E,53,10,00,0A,20,20,20,20,20,20,00,00,00,FC,00,4C,47,20,54,56,0A,20,20,20,20,20,20,20,00,ED
dont get it, how do i change anything...
for example right now my netbook says that tv is at 1680x1050 (max that it goes using normal video settings), but when i click info button on TV, it says 1400x1050 (that is the actual resolution)..like wtf is going on. why is it doing that.
OBVIOUSLY if it can operate at that res, it CAN operate at 1280x720, but piece of shit fucks up with aspect ratio and wont allow me to put it on 720.
if i set it on 1280x720 in video settings, then actual TV resolution will be 1280x960. this is clearly an aspect ratio problem.
EDIT:
i kind a got it working. uninstalled drivers, reinstalled while tv is connected.
now it shows up aspect ratio thingy on tv, when using intel's graphics panel.
so i got it on 720p. least it seems like tv says it is 1280x720.
its still fucking CONFUSING and pissing me the fuck off. why the fuck does it say 1280x720 on tv in the first place, if its cleary NOT 720 ????
so anyway, now tv really says its 720, but quality sucks big time.
im about 2-3 meters away from tv and at 720 its bit hard to read text. i mean i can read every word, but its blurry / out of focus or something like that. i don't know wtf.
lame as intel shit.
and acer support sucks dicks big time, never gonna buy acer again. what shittarded support wants serial number ..pfff. fucking tracking people, its lame.